Required accessories for Gen3 Aurora XS columns

All Aurora XS columns require the following accessory:

Aurora XS Installation Toolkit

1. Part No. XSITK01
2. Includes an adapter for Aurora XS columns and probe setting tool to assist with installation
   

Depending on your desired column length, the following accessories may be required:

IonOpticks Column Heater

1. Part No. COLHTR01
   
2. Includes a 1m power cable
   
3. Pairs with the Heater Controller
4. Optional for 25cm Aurora Ultimate XS and 15cm Aurora Elite XS columns. Please note that operation of 25cm Aurora Ultimate and 15cm Aurora Elite columns without a column heater may result in fluctuating operating temperatures and higher back pressures at optimal flow rates, generating inconsistent sample separation
   

Heater Controller

1. Part No. IOHEATCON1
   
2. Pairs with the IonOpticks Column Heater

Column Heater Extension Cable (1m)

1. Part No. EXTCABLE03
2. Optional 1m extension cable for IonOpticks Heater

• Related Articles

• Required accessories for Gen3 Aurora XT columns

  Depending on your desired column length and source setup, the following accessories may be required: XT Nanospray Flex Adapter Part No. XTFLXAD01 Required if you wish to operate Aurora XT columns with the Thermo Nanospray Flex source IonOpticks ...

• Required accessories for Gen3 Aurora CSI columns

  Depending on your desired column length and instrument setup, the following accessories may be required: Earth cable Part No. HVCABLE02 Required for all Aurora CSI column dimensions in a Bruker CaptiveSpray source if an existing earth cable is not ...

• Gen3 Aurora XS column product details

  few things to note about the Aurora XS product range: These columns are compatible with Sciex's Optiflow Turbo V source using the nanoflow probe The column is wound inside of the cassette and both are sold as a single unit together If you wish to ...

• Required accessories for Gen3 Aurora columns

  Depending on your desired column length, one of the accessories listed below is required: High-voltage connection cable Part No. HVCABLE01 Required for 60cm Aurora Frontier, 25cm Aurora Ultimate, and 15cm Aurora Elite columns in a Thermo Nanospray ...

• Gen3 Aurora column product details

  The Aurora product range is most suitable if... You plan to use your columns with Thermo Scientific's Nanospray Flex source, and You plan to heat your columns with a heater other than the IonOpticks Heater (e.g., Sonation Column Oven), or you do not ...