Installing the HeatSync™ Rapid 5 cm Column Housing into a Thermo Scientific Nanospray Flex source

Installing the HeatSync™ Rapid 5 cm Column Housing into a Thermo Scientific Nanospray Flex source



This video demonstrates installing the HeatSync™ Rapid 5 cm Column Housing with the Thermo Scientific Nanospray Flex source, using either the HeatSync™ Controller and HeatSync Regulator™ or the IonOpticks Heater Controller. It includes video and step-by-step guidance from our User Guide covering:
  1. (0:00) Installing the HeatSync™ Rapid 5 cm Column Housing
  2. (0:25) When to use (and not use) the HeatSync™ Regulator
  3. (0:42) Setting up the IonOpticks Heater Controller (1st Gen) with Temperature Delta Table (°C)
  4. (1:20) Setting up the HeatSync™ Controller with Regulator
  5. (2:56) Installing onto the Nanospray Flex source
  6. (4:00) Attaching the Column Heater
  7. (4:10) Adjusting the emitter position
  8. (4:24) Allow column housing temperature to stabilise