Expected back pressure, 15cm Aurora Elite column

The below graph depicts the expected backpressure of a 15cm Aurora Elite column, for a given flow rate at both room temperature and 40°C.

The buffer composition is 79.9% water, 20% acetonitrile, 0.1% formic acid.

The Aurora Series column and nanoZero® fitting can both handle pressures >1700 bar (Generation 3) and >1200bar (Generation 2).

• Related Articles

• Expected back pressure, 25cm Aurora Ultimate column

  The below graph depicts the expected backpressure of a 25cm Aurora Ultimate column, for a given flow rate at both room temperature and 40°C. The buffer composition is 79.9% water, 20% acetonitrile, 0.1% formic acid. The Aurora Series column and ...

• Expected back pressure, 5cm Aurora Rapid75 column

  The below graph depicts the expected backpressure of a 5cm Aurora Rapid75 column, for a given flow rate at both room temperature and 40°C. The buffer composition is 79.9% water, 20% acetonitrile, 0.1% formic acid. The Aurora Series column and ...

• Expected back pressure, 60cm Aurora Frontier column

  The below graph depicts the expected backpressure of a 60cm Aurora Frontier column, for a given flow rate at 60°C. This graph was recorded after 50 sample injections. The buffer composition is 79.9% water, 20% acetonitrile, 0.1% formic acid. The ...

• Expected back pressure, 5cm Aurora Rapid150 column

  The below graph depicts the expected backpressure of a 5cm Aurora Rapid150 column, for a given flow rate at both room temperature and 40°C. The buffer composition is 79.9% water, 20% acetonitrile, 0.1% formic acid. The Aurora Series column and ...

• Recommended conditions for 15cm Aurora Elite column

  Temperature & flow rate We recommend the use of a column oven installed at the mass spectrometer source for the 15cm Aurora Elite column. Operation without a column oven may result in fluctuating operating temperatures and higher back pressures at ...