Aurora Series columns are supplied pre-packed with our high-resolution stationary phase packing material and are ready for use. This model is compatible with a column oven (Sonation Column Oven recommended) using a Thermo Nanospray Flex source. 25cm ...
The 15cm and 25cm Aurora Series columns require an earth cable, which allows the earth connection to be established with the nanoZero® (see 15.1 below). The 5cm RAPID Aurora Series column requires a replacement metal holding arm for the Column ...
The 15cm and 25cm Aurora Series columns require a high-voltage cable, which connects the source high-voltage to the nanoZero® fitting (see 4 below). Only one cable is required per instrument, not per column. The 5cm RAPID Aurora Series column does ...
To optimise column lifetime and performance, we recommend that the following conditions are met while your instrument is standby and idle mode: The instrument continues to run at the desired operating pressure The instrument ideally continues to run ...
If possible, do not remove the Aurora Series column from a UHPLC system. If removal is required, please follow the below instructions: Run 80% B for 5min at operating flow rates before reducing flow to 0.002 μl/min for 10min or until the back ...